Rugged Blade UPS™

Light in Weight, Not Power
Despite being lightweight, the Rugged Blade UPS™ provides extremely high power density. Offering 1000W of AC or DC output power in half the space of a traditional UPS, it is one of the most powerful and compact UPS products on the market. The system is rated to provide 1000W of continuous power from -20ºC to 60ºC (with lithium-ion battery pack option). Some derating may occur at the extreme limits of specifications.

Power Factor Corrected
This UPS accepts a wide range of voltages and frequencies, while providing clean, reliable AC and DC power as well as seamless switching from AC shore power to DC power to the internal battery.

On-Line Double Conversion
The Rugged Blade UPS ™ creates DC voltage which is then converted to the needed AC or DC output voltage, protecting sensitive equipment from input surges, spikes, brownouts, blackouts and noise.

Flo-Thru™ Technology
With Acumentrics' unique Flo-Thru™ technology and heatsink tunnel design, this UPS delivers maximum protection to components from blown precipitation, airborne particles and other contaminants. Advanced fan controls provide the correct airflow for cooling, while minimizing noise and extending fan life.

Optional Advanced Paralleling
Advanced N+1 paralleling makes the Rugged Blade UPS™ the building block in a modular system, for up to 10kVA and ensuring redundancy with no system downtime – essential for mission critical applications.

Dual Input with Automatic Power Selection
A Rugged Blade UPS™ with AC or DC input prioritizes AC shore, then DC input and then internal battery power sources. In the event of loss of AC power the external DC input takes precedence over the internal battery, which provides back up power if both AC and DC input power is lost.

RUPS Transferring
These units transfer seamlessly without interrupting the load quality and have zero switch over time.

User-Replaceable Battery Pack
The Rugged Blade UPS™ features Lithium-Ion or low maintenance, valve-regulated lead acid, enclosed in a user-replaceable battery pack for rapid hot-swap field replacement. The Lithium-Ion battery pack provides a lightweight energy source with longer shelf life and cycle life.

Accepts True Worldwide Input™
The Rugged Blade UPS™ accepts AC input power from 80 VAC to 265 VAC / 47 Hz to 440 Hz, as well as DC input from 20 VDC to 32 VDC. At 20 VDC some derating may occur.

Reliability of communications is dependent on rugged power supplies. Acumentrics' powerful, portable Rugged Blade UPS™ is far lighter in weight than most UPS products, bringing a new level of power portability to a wide range of military applications and environments. This double on-line conversion unit is packed with technology that provides high power density, continuous output power, as well as ease of installation and maintenance.

INPUT SPECIFICATIONS
AC Voltage: 80-265 VAC, single phase
Frequency: 47-440 Hz
AC Circuit Breaker Rating: 20A
DC Voltage: 20-32 VDC
Maximum DC Current: 70A
Power Factor: 0.99 typical
Efficiency with 1000W Load: ACη = 0.83 DCη = 0.82

OUTPUT SPECIFICATIONS
Continuous Power: 1250VA/1000W
    parallel units for greater load carrying capability
Load Crest Factor: 2.15 continuous
Peak Current: 19A (1000W AC output)
AC Voltage: 115 VAC +/- 5%
AC Frequency: 60 Hz +/- 0.5 Hz
AC Waveform: Sinusoidal
Total Harmonic Distortion (THD):
    <1.5% with 1000W resistive load

ENVIRONMENTAL
Operating Temperature:
    with Lithium-Ion battery pack: -20°C to 60°C
    with Lead Acid battery pack: -20°C to 50°C
    w/o battery: -30ºC to 65ºC
Storage Temperature: -32°C to 66°C
    w/o battery: -40ºC to 70ºC
Humidity: 5% to 95% (non condensing)
Altitude: 0 to 15,000 ft operating;
    0 to 40,000 ft non-operating
Rain: Operates in blown precipitation

BATTERY SPECIFICATIONS
Battery Type: Lithium-Ion or low maintenance VRLA
Typical Run Times: Lithium-Ion 10 minutes, VRLA 4 minutes
External Battery Run Times: Lithium-Ion 45 minutes,
    VRLA 25 minutes
Recharge Time: Lithium-Ion 3 hours, VRLA 4 hours,
    External Battery 5 hours

MECHANICAL SPECIFICATIONS
Chassis Size (H x W x L): 1.75" x 17" x 21"
Envelope size (H x W x L): 1.75" x 19.5" x 24.75"
Weight: w/o battery pack: 20 lbs.
    with Lead Acid battery: 33 lbs.
    with Lithium-Ion battery: 28 lbs.

COMMUNICATION PORT
    9-pin (DB-9) for user interface and remote
    monitoring; SNMP is optional

OPTIONS
• DC Output: 12, 24, 28 or 48 VDC Output
   Basic unit offers up to 500W of DC with remaining output AC.
   Other wattages available with customized units.
• AC Output: 230 VAC 50 Hz Output
• Rackmount Accessories
• External DC Input
• External Battery Pack(s)
• Parallel Operation for Loads up to 10kVA
• Simple Network Management Protocol Version - V3
• Shipboard – Double-pole circuit breaker approved for
   use with shipboard Delta power

STANDARDS
The Rugged Blade UPS™ is tested and certified to meet
the following standards:
EMI: MIL-STD-461F: RE102, CE102, CS101, RS103, CS114
Shock: Packaged MIL-STD-810-G method 516.4 IV, VI
    Operating MIL-S-901-D, grade A, class II, type B
Vibration: MIL-STD-167-1, type I vibration
    MIL-STD-810-G Cat. 8, procedure I
Shipboard: MIL-STD-1399 section 300A (at customer request)
Environmental: MIL-STD-810-G

Click here for a printer friendly version of the Rugged Blade UPS™ data sheet.

For more information please contact Acumentrics either via email at cs@acumentrics.com or call customer service at 781-461-8251 ext. 328.