Government Agencies

Providing reliable, consistent power for mission-critical remote applications.

Government civilian agencies often need compact communications and intelligence gathering systems that are easily deployable to remote locations.  

Many of these locations will not have a reliable source of consistent, regulated power.  However, such power is necessary to ensure the mission can be accomplished successfully.   Furthermore, size and weight are critical as oftentimes all equipment must be transported over rough terrain without vehicles or aircraft. 

For effective remote/covert operations, a power system must have the following attributes:

  • A careful balance between size, weight, and runtime.  A power system with long runtime is of limited utility if it is an undue burden.    
  • The ability to scavenge power from any source in order to continue the mission without interruption.  Solar panels, car batteries, military vehicles, generators, etc. may be the only available sources in remote locations.  Without the capability to convert the available power to the needed format, communications in particular may be interrupted, and thus the mission may be compromised.     
  • The ability to operate in adverse conditions such as precipitation, heat, cold, humidity and blowing dust.  Such conditions are often the reality in remote location, which often occur when nature is at her worst. 
  • The ability to charge the internal batteries while simultaneously powering equipment.  Doing so with a conventional battery can result in damage.
  • Achieving long battery cycle life (many charge/discharge cycles), which requires a suitable charging system coupled with the internal battery.  
  • Multiple USB ports to expand the single port on most tablet computers.  Tablet computers are commonly used in remote kits due to small size and light weight.  A suitable power system provides multiple USB devices that can power, operated and transmit data from multiple devices. The result is more efficient operations, thus making the most of every crucial minute.

 

 

Other products & accessories are available:

View All Products

 

For any questions, or feedback

Contact us
Live Chat

Get in touch

Contact us Live chat

Pack-Power™ System

Never Lose Power with Our Pack-Power™ System!
A Small Form Factor Advanced System with More Capability than a UPS, Power-Bank, and Battery Combined!
For any questions

View product

Pack-Power System

Tested to withstand

  • Cold temperature

    Acumentrics Total Power Solutions including the RUPS™ are tested to the most stringent cold temperatures down to -20°C with LFP batteries. For solutions requiring lower temperatures, contact Acumentrics.

    Learn more

  • Hot temperature

    Acumentrics Total Power Solutions are field war zone proven and support very high temperatures with very long life and high reliability with LFP Chemistry up to 60°C. Storage at high temperatures is possible with a very limited effect on battery life.

    Learn more

  • Blown Precipitation

    Our unique heat exchanger Flo-thru™ technology, tunnel design and sealed enclosure provide maximum protection for internal components from damaging effects of blown precipitation and any other contaminants like dust, sand, moisture and others, delivering an unmatched reliability for our RUPS™ in combat zones harsh environment.

    Learn more

  • Shock and vibration

    All our RUPS™ used in communications and electronic power devices are tested and proven with extremely high reliability in combat zone extremely harsh environment for mobile applications with stringent shock and vibration abuse. They have been tested and passed MIL-STD-810G and MIL-S-901-D.

    Learn more

  • Fault tolerant

    Our Rugged Blade UPS™ is designed to support, resilient, fault tolerant, power systems, using an N+1 configuration, when clean power is mission critical. Acumentrics peer to peer relationship between the units with a "moving master, sliding slave" scheme delivers the highest possible reliability with up to 8 units in parallel using a very resilient N+1 Rugged Sync Bus™

    white paper

Total Power Solutions

  • RUPS™
    Acumentrics RUPS 1,000W to 2,400W series RUPS have achieved MIL-STD-810-G (environmental), MIL-STD-461-F (electro-magnetic interference), and MIL-STD-1275-D (steady state and transient voltages) certifications.

    View products

  • PDB and PDU
    The Rugged PDU and Rugged Backplane from Acumentrics eases power distribution, simplifies cabling and offers circular mil-spec connectors sealed with positive latching to protect against rain, wind, dust, blowing sand, humidity, vibration and shock.

    View products

  • Battery Packs, Internal and External modules
    LFP and Lead Acid battery packs provide low maintenance, high run time and enhanced cycle life. Acumentrics External Battery Modules (EBM) increase battery runtime.

    View products

  • Cables & Racks accessories / Cabinets and Transit cases
    Sampling of Acumentrics Rugged UPS accessories. Contact customer services at cs@acumentrics.com or at 844-787-7872 (844-RUPS-USA) to discuss your configuration needs.

    View products

Acumentrics' Products

View

Why Acumentrics

Since 1994, Acumentrics engineering and manufacturing teams continue to deliver total power solutions that provide data center quality power to mission critical applications. Made in Walpole, MA (USA) Acumentrics total power solutions includes Rugged-UPS™ (Uninterruptible Power Supply), power conditioners, inverters, portable power and power distribution units that can be mounted in 19" racks, transit cases, roller cases, back packs and hand carried.



Read

Let's work together

What type of UPS do you need?
What is the best way to contact you?
Do you need DC input?
Do you need DC output?
If you need DC output, please choose from the following load requirements
Note: These are available on the ACG2500 Series only. DC output for the ACG1252 Series is 150W.
If you need DC output, please choose from the following voltage
Which AC output do you need?
Do you need battery backup?
If you would like a quote prepared for you, please choose the quantity
End User Application Type
Region
Call back & Acumentrics news
Acumentrics, Inc.
10 Walpole Park South
Walpole, MA 02081