LOW - MAINTENANCE HIGH POWER DENSITY LOW SELF - DISCHARGE
Lead-Acid Extended 2U Battery Packs
FOR ACUMENTRICS' RUGGED-UPS™ 1252
With these Acumentrics lead-acid battery modules, there is never any need to check specific gravity or replace or top off water. All that is needed is a charge every six months to preserve battery life.
The lead-acid battery module’s sealed construction eliminates electrolyte leakage from the terminals or case, ensuring safe, efficient operation in any orientation.
Low Self-Discharge For Longer Life
At ambient temperatures between 20°C and 25°C, the self-discharge rate of the Acumentrics lead-acid battery module is less than 3% per month. This allows storage for up to six months without significant state-of-charge loss.
Operate in Any Orientation
With their sealed construction and electrolyte suspension, Acumentrics’ lead-acid battery modules can be mounted in any orientation, vertically or horizontally. (However, inversion should be avoided.)
Efficient Gas Recombination
These battery modules incorporate a unique Absorbent Glass Mat technology that effectively recombines over 99% of the gas generated during normal usage.
Hot and Cold Weather Operation
Lead-acid battery modules can be used over a broad range of ambient temperatures, allowing considerable flexibility in system design and location.
High Recovery Capability
The Acumentrics lead-acid battery modules have excellent charge acceptance and recovery capability, even after very deep discharge.
LFP BATTERY PACKS
For lighter weight and improved performance, Acumentrics offers LFP battery packs for all its RUPS.
Hot-swappable Internal LAB Battery Pack: 168Wh providing 4 minutes run time for 1kW load
Recharge Time: 4 hours to 90%
Average Nominal Voltage: 24 VDC
Nominal Capacity: 7 Ah
Discharge Peak Rate: 65 A
Weight: 15 lbs
Operating Temperature: -18°C to 50° C
Storage Temperature: -32° C to 66° C Humidity: 10% to 95%