Rugged Blade UPS Parallel, Fault Tolerant and N+1 Operations | Acumentrics - Total Power Solutions

The Rugged Blade UPS delivers a continuous power of 1250VA/1000W. It is designed to support parallel operations when more power is required. Up to 8 units can be connected in parallel delivering a total continuous power of 10,000VA/8,000W.

It is also designed to support Resilient, Fault Tolerant Power Systems, using an N+1 configuration for Mission Critical Applications. When for example the application requires 7kW, the system can be configured with 8 units, all 8 units sharing the 7kW critical load. When one unit fails, the load is automatically properly distributed to the 7 working units. For this to occur without affecting the quality of the AC output power with very high reliability, several advanced features (hardware and software) are integral part of each Rugged Blade UPS™.

Other Acumentrics white-papers

Lithium ion Battery Packs Air Transportation: regulation, rules and practical guide
Safety Comparison of different Lithium Ion Chemistries

Fill the form below for a free download and complete white paper.

Tested to withstand

Cold temperature

Acumentrics Total Power Solutions including the RUPS™ are tested to the most stringent cold temperatures down to -20°C with LFP batteries. For solutions requiring lower temperatures, contact Acumentrics.

Learn more
Hot temperature

Acumentrics Total Power Solutions are field war zone proven and support very high temperatures with very long life and high reliability with LFP Chemistry up to 60°C. Storage at high temperatures is possible with a very limited effect on battery life.

Learn more
Blown Precipitation

Our unique heat exchanger Flo-thru™ technology, tunnel design and sealed enclosure provide maximum protection for internal components from damaging effects of blown precipitation and any other contaminants like dust, sand, moisture and others, delivering an unmatched reliability for our RUPS™ in combat zones harsh environment.

Learn more
Shock and vibration

All our RUPS™ used in communications and electronic power devices are tested and proven with extremely high reliability in combat zone extremely harsh environment for mobile applications with stringent shock and vibration abuse. They have been tested and passed MIL-STD-810G and MIL-S-901-D.

Learn more
Fault tolerant

Our Rugged Blade UPS™ is designed to support, resilient, fault tolerant, power systems, using an N+1 configuration, when clean power is mission critical. Acumentrics peer to peer relationship between the units with a "moving master, sliding slave" scheme delivers the highest possible reliability with up to 8 units in parallel using a very resilient N+1 Rugged Sync Bus™

white paper

Total Power Solutions

RUPS™
Acumentrics RUPS 1,000W to 2,400W series RUPS have achieved MIL-STD-810-G (environmental), MIL-STD-461-F (electro-magnetic interference), and MIL-STD-1275-D (steady state and transient voltages) certifications.

View products
PDB and PDU
The Rugged PDU and Rugged Backplane from Acumentrics eases power distribution, simplifies cabling and offers circular mil-spec connectors sealed with positive latching to protect against rain, wind, dust, blowing sand, humidity, vibration and shock.

View products
Battery Packs, Internal and External modules
LFP and Lead Acid battery packs provide low maintenance, high run time and enhanced cycle life. Acumentrics External Battery Modules (EBM) increase battery runtime.

View products
Cables & Racks accessories / Cabinets and Transit cases
Sampling of Acumentrics Rugged UPS accessories. Contact customer services at cs@acumentrics.com or at 844-787-7872 (844-RUPS-USA) to discuss your configuration needs.

View products

Acumentrics' Products